NEWS
Provide Customers With One-stop Application Solutions
How to remove the film of stainless steel plate
Release Time:
2022-09-22 15:46
How to remove the film of stainless steel plate: use electric hair dryer, use stainless steel protective film remover, use gasoline, industrial alcohol, and use acid solvent for corrosion. 1. Use a hair dryer to blow the stainless steel protective film, and then quickly tear it off by hand. Because of the principle of heat expansion and cold contraction, the stainless steel protective film will be heated, so it is easy to tear off by hand. 2. Use the stainless steel protective film remover to wipe off the tape dust on the stainless steel surface, and spray the stainless steel protective film that needs to be removed with the stainless steel protective film remover. After five to ten minutes, the surface of the tape starts to blister, fall off and clean. Stainless steel plate and titanium plate have no adverse consequences.
Stainless steel refers to steel that has resistance to weak corrosive media such as air, steam and water and chemical corrosive media such as acid, alkali and salt. It is also called stainless and acid-resistant steel.
Keywords: sheet
Related News
2025-09-26
2025 Company's Annual Shenzhen Tourism Activities
2025 Company's Annual Shenzhen Tourism Activities
View more
Marketing Center：
The 9th Floor, The Foshan Stainless Steel Headquarter Building, Av. 95# Foshan Dadaozhong, Chancheng District, Foshan City, Guangdong Province, China P.C.528500
Tel：+86-757-83311766
E-mail：jf@jefengmetal.com
Production Base：
No.33, Xingjiao Road, Cangjiang Industry Zone, Gaoming District, Foshan City, Guangdong Province, China
Tel：+86-757-83920502
E-mail：jfy@jfhb.cn